Come on! Help us celebrate this fantastic feat by stopping in and letting us know how StangNet has shaped your experience surrounding the Ford Mustang!
Location: Ya, here's to The Drunken Clam boys, where they don't ask for proof of age and neither do I...
Re: 95 Cobra R ???/ -
03-27-03, 07:03 PM
Quote:
Originally posted by LiquidCrew03
yes there was an 95 Cobra R... it had a 351, only came in white and didn't have things like A/C or rear seats if i can remember there was only 300or was it 500, made
Head over to svtpeformance.com and go into the Cobra R section. They might be able to help you out.
Here is some more info in case you are curious...
Only 250 were made, but 248 were sold. Ford kept the #1 and #2 R. And the only way you could by them from the floor was if you had a registered racing license. No one from the general public could by it. The 1993 Cobra R 107 were made and most of them were bought by collectors. That is not what Ford intended them to be bought for. So when the 95 R came, Ford wanted them on the track, hence only selling to race car drivers.
Originally posted by Black_Glory Head over to svtpeformance.com and go into the Cobra R section. They might be able to help you out.
Here is some more info in case you are curious...
Only 250 were made, but 248 were sold. Ford kept the #1 and #2 R. And the only way you could by them from the floor was if you had a registered racing license. No one from the general public could by it. The 1993 Cobra R 107 were made and most of them were bought by collectors. That is not what Ford intended them to be bought for. So when the 95 R came, Ford wanted them on the track, hence only selling to race car drivers.
Peace...B_S
the 93 Cobra R's could only be purchased if you had a racing license also...
I have the specs for a cam from Saleen for the S351R. I am tolf there are a few different grinds. The Cobra R I am not sure about. I can try to find out if you are looking for a stock cam for one. I am pretty sure though that it ran the same camshaft as a lightning since the motors were pretty close to the same.
Scott
96-013 S351R AKA "The Animal"
So what are the cam spec? Are they strictly for a supercharged engine or NA.
I have a 95 Saleen clone with a S351 hood. I will be building up a 351 to drop into it. What did Saleen do to make sure there was enough clearance between the intake and hood?
Edwin
95GT-Fireball coil,Mac underdrive pulleys,Homemade CAI with K&N,Oil breather filter,Saleen/Hurst shifter,Steeda short throw tri axis shifter,35th anniversery carbon fiber shift knob,Bullitt pedals,Cobra white face gages, 17" Cobra chrome wheels, Side scoops,Custom paint Black with Blue pearl, Saleen ground effects kit,S351 hood, S281 fin, Magnaflow catback 3.5tips, Maxspeed 2" lowering springs, Tokico shocks & struts,Euroclear headlights/turnsignals.
More to come