Go Back   Mustang Forums at StangNet > Mustang Forums > Power Adder and Race Tech > Race Tech
Reload this Page new combo what will it run?
Notices
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
5.0fox's Avatar
Official Member
 
Posts: 421
Join Date: February 2003
Location: buckley/enumclaw wa
new combo what will it run? - 12-01-03, 09:39 PM

with the mods in my sig ported heads and intake an e-303 cam and 1.6 roller rockers what should my car run on et streets?


thx




87 5.0 lx

Headers,x-pipe, flowmaster catback,4.10 gears,cai,draglites,pullies, e-303 cam,351w ported heads w/ 2.02/1.60valves, comp valve springs,msd tfi coil, 1.6 rollers ,nitto radials, no a/c or smog,70mm t-body,73mm maf,afpr,9mm wires, fresh t-5 ,steel bearing retainer and a proform shifter performer rpm intake, 190lph fuel pump, phenolic spacer

New Best 12.98@106 w/ 1.72 60' on 87 octane fresh off the freeway in the heat!
Reply With Quote
(#2 (permalink))
Old
blown5.0's Avatar
Founding Member
 
Posts: 1,282
Join Date: September 1999
Location: Cranford, NJ
12-04-03, 02:04 PM

I would say 12.90's at 102 would be a good estimate. beware of the e303 cam, it has no advance built into it, most cams build 4 deg advance into it, so you'll have to install it with one of those adj timing chains set for 4 deg advance. if you install it straight up it will be a dog. those motorsport cams are old dinosoars anyways, get a comp cams or something.




#62 NEI/EMRA/PDA
'High Performance Mustangs'
www.StreetMotorsports.org
www.NortheastIron.org
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump