Go Back   Mustang Forums at StangNet > Mustang Forums > 2.3L Mustang > 2.3L (N/A & Turbo) Tech
Reload this Page n/a 250 hp?
Reply
 
LinkBack Thread Tools Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
Founding Member
 
Posts: 477
Join Date: May 2002
Location: Mo
n/a 250 hp? - 12-05-03, 05:53 AM

im thinking about selling my 5.0 and getting a 2.3 mostly because of gas. so i was wondering could i build a n/a 2.3 engine that can produce 250hp?


Reply With Quote
(#2 (permalink))
Old
Official Member
 
Posts: 1,844
Join Date: February 2003
Location: Manhattan, Kansas
12-05-03, 07:33 AM

Quote:
Originally Posted by charlesw6954
im thinking about selling my 5.0 and getting a 2.3 mostly because of gas. so i was wondering could i build a n/a 2.3 engine that can produce 250hp?
its definately possible but be prepared to spend alot building a long block w/ at least 12.1 compression. I've seen 300hp mini-stock cars but they wouldn't be even close to streetable.

However,
A 87-88 turbocoupe 2.3 turbo was 200hp stock. Do pullies, exhaust(3" down pipe), use older style turbo (T3), run about 18 psi, and do some porting. Just those ebay items and you'll probably be 250hp with a bunch of torque and still get a good MPG if you keep you foot off of it.


Reply With Quote
(#3 (permalink))
Old
Founding Member
 
Posts: 477
Join Date: May 2002
Location: Mo
12-05-03, 09:26 AM

well right now im getting put on probation and will need a car with good gas milage. the stuff i want to do to the 5.0 i have now will cost me too much. so i just want a pretty fast 2.3 mustang. would it be possible to get 250hp at the flywheel?


Reply With Quote
(#4 (permalink))
Old
nomuffler's Avatar
Official Member
 
Posts: 341
Join Date: August 2003
Location: Awash in a sea of decedant luxury and meaningless sex.
12-05-03, 09:34 AM

gas mileage and horsepower fight each other


Reply With Quote
(#5 (permalink))
Old
DougNuts's Avatar
Founding Member
 
Posts: 2,552
Join Date: July 2000
Location: Georgetown Ky
12-05-03, 09:56 AM

Quote:
Originally Posted by nomuffler
gas mileage and horsepower fight each other
Exactly!

On top of that, I'm averaging 19-20mpg with my 2.3
Don't assume that a 4 cylinder will get you better mpg.


Reply With Quote
(#6 (permalink))
Old
mr_woodster's Avatar
Official Member
 
Posts: 1,300
Join Date: July 2003
Location: Riverside, CA
12-05-03, 09:59 AM

go turbo 2.3 charles, 250hp is very achievable/streetable that way. N/a 2.3 of the 250 hp type will cost you alot more than a 5.0 doing 250hp. pull a 2.3t from a turbocoupe/merkur-xr4ti and do the swap. If i do a search u will find alot of stuff thats required for the swap. Or go to stingers tech section
http://projecthp.ford23.com/index.html
all of which are a good way to get an introduction into what u can do witha a 2.3


Reply With Quote
(#7 (permalink))
Old
Official Member
 
Posts: 968
Join Date: December 2003
Location: West Texas
12-08-03, 11:25 PM

Quote:
Originally Posted by charlesw6954
im thinking about selling my 5.0 and getting a 2.3 mostly because of gas. so i was wondering could i build a n/a 2.3 engine that can produce 250hp?
What year 5.0 that you have that you may sell?

also is it a hatch back or not?


Reply With Quote
(#8 (permalink))
Old
Crovax's Avatar
Type O Danzigative the Dark Lord of All Dark Things in the Dark of Darkness
 
Posts: 5,082
Join Date: September 2000
Location: San Antonio, Texas
12-08-03, 11:55 PM

If you did you'd sell it for a 5.0 mostly because of the gas.




President,
Official Stinger Club
Official Stinger Club Member #1
Reply With Quote
(#9 (permalink))
Old
Official Member
 
Posts: 968
Join Date: December 2003
Location: West Texas
12-09-03, 08:08 AM

Quote:
Originally Posted by Pro-Hawk
What year 5.0 that you have that you may sell?

also is it a hatch back or not?
I got my 2.3L 93' Mustang for better gas milage since I had a 24 mile round tripe drive to work 5-6 days a week. It was clearly cheaper than my 96' 4x4 Tahoe

Now that I no longer work that far out I decided to either turbo my 2.3L or put a 5.0L in it , that was why I was asking.


Reply With Quote
(#10 (permalink))
Old
Founding Member
 
Posts: 477
Join Date: May 2002
Location: Mo
12-09-03, 02:44 PM

i have an 89 gt hatchback, its black, performance wise it has shorty headers, o/r hpipe, flowmaster catback, cold air intake, pulleys, and removed a/c. i recently replaced the tranny with a stock one with lesser miles and also replaced the clutch with a ford motor sport clutch. the car has 136k miles on it i belive. it has some paint chips, about 3 dings, about a 2-3 inch rip in the headrest (from some punk kids), needs new light bulbs in the interior. other than that the interior is good. if i did sell it id sell it for about $5000 knowing i paid that much for it and also put more money into it so i will sell if for that much.


Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Will Denso Iridium hurt a N/A engine? 00BlackBeautyGT 4.6 Tech 12 12-06-03 05:36 AM