Go Back   Mustang Forums at StangNet > Mustang Forums > SVT > SVT Tech
Reload this Page v6 with cobra size tires needs help
Notices
Reply
 
LinkBack Thread Tools Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
30AnnivStang's Avatar
Founding Member
 
Posts: 844
Join Date: July 2001
Location: Columbia, SC
v6 with cobra size tires needs help - 12-08-03, 07:08 PM

OK, i've got a question for you Cobra guys. I'm asking you this b/c you guys w/ 03 cobras are the only ones i know of that run mustangs with 275/40-zr17 tires from the factory. I'm running a 1994 v6.

i upgraded my sixer with 17x9 mach1 wheels from AFS. they have kumho 712's on them in the same size that you guys run. I am getting A LOT of tramlining (the tendency for the tires to follow every longitudinal rut and groove in the road) with these new tires/wheels. I understand that this is a side effect from having an ultra wide tire out front. But essentially, as far as i know our front suspensions are the same except for shocks and springs. SOOO.... do you guys have this problem? how about guys with the same brand tires i do? there has to be some of you in here with Kumho 712's.

I'm trying to figure out if this is fixable or if i have to get rid of my tires. it is so bad that i'm actually getting motion sickness on a 25 minute drive (or less sometimes)


please help big brothers.




I'm the S-N-Double O-P-T-O-Double M-Y-T-O-M ya see?

Member of PACT and NAFR and GWSLK
People Against Clear Tailights, Neons Are For Ricers and Giant Wings Scare Little Kids

I drive a 1994 MachWannabe.
Check her out at My Cardomain Website

Member of the 1994 30th Anniversary club, if you have a '94 use this avatar and let us all know!
Reply With Quote
(#2 (permalink))
Old
How to fuel a Mustang:
 
Posts: 8,689
Join Date: August 1998
Location: Phoenix, AZ suburbs
12-08-03, 08:20 PM

Checked the alignment settings lately? A little extra toe in can help a great deal.




Curt

Hit me up on myspace.com or soundclick.com

Reply With Quote
(#3 (permalink))
Old
30AnnivStang's Avatar
Founding Member
 
Posts: 844
Join Date: July 2001
Location: Columbia, SC
12-08-03, 09:59 PM

Quote:
Originally Posted by fiveofanatic
Checked the alignment settings lately? A little extra toe in can help a great deal.
i planning on a trip to the alignment shop tommorrow if i have time.

i'm shooting for -.7* camber (the closer to 0 the better right?)
the caster is unadjustable at 3.6*
and a total toe in of 3/32

do these sound right?

does anyone know what these settings are on an 03 Cobra?


Reply With Quote
(#4 (permalink))
Old
How to fuel a Mustang:
 
Posts: 8,689
Join Date: August 1998
Location: Phoenix, AZ suburbs
12-10-03, 07:21 PM

Camber sounds good; -.50° to -1.0° is not too bad.

Caster sounds ok. The more the merrier, plus you want close to a half-degree more positive on the right than the left.

Toe sounds dead on, anywhere from +1/16" to +1/8" is ok.




Curt

Hit me up on myspace.com or soundclick.com

Reply With Quote
(#5 (permalink))
Old
Lsredy2kstang's Avatar
Look, I'm special, dammit
 
Posts: 2,796
Join Date: May 2000
Location: Woodstcock, Georgia
12-10-03, 07:45 PM

All I say is any toe is good, only unless it is your mama's toe! That would be bad!




Laser Red V6 and proud!
194 RWHP
220 RWTQ
**Exterior**-Have some, just ask
**Interior**-Have some just ask
**Engine**-Have some just ask
**Ignition**-Have some just ask
**Suspension**-Have some just ask
**Drivetrain**-Have some just ask

If it's not a Stang, then why the hell are you driving it!
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
?s on y2k Cobra R wheels and tire size... Sinultros 4.6 Tech 13 12-08-03 11:34 PM