Go Back   Mustang Forums at StangNet > Mustang Forums > Classic Mustangs > Classic Talk
Reload this Page I don't think he can beat me, what do you think?
Notices
Reply
 
LinkBack Thread Tools Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
68stang351's Avatar
Founding Member
 
Posts: 792
Join Date: May 2002
Location: Savoy TX
I don't think he can beat me, what do you think? - 01-22-04, 10:15 PM

My buddy that I have beat about 4-5 times pretty easily that has (88 coupe - 306, edelbrock performer RPM, 600 carb, B303 cam, longtubes, underdrive pulleys, and pertronix, T5 with 2.79 gears, no that's not a misprint, 2.79's), thinks that a 86, with a stock 302 with 24# injectors, B303 cam, T5, and stock everything else can beat me even with my mods in the sig plus my future roller cam Comp Cams roller .512/.153 lift and .484/.496 duration setup.

What a joke!!!

What do you guys think? BTW, I've beat plenty of modded 5.0's, so I really don't think it's an issue. I put myself at somewhere in the 13's, what do you think?

All I had to say to him was "Just wait, you'll see!".






Quote:
Originally Posted by 90mustangGT View Post
You're forgetting Iraq. I am jealous of the state of Iraq because the feds give them more time, money, and resources than any other state, but they don't have to pay taxes, they get to have fully automatic AK-47's, and on top of that, gas cost what we pay for water, and they don't have to keep the cats on their H pipes.

Hoofbeats are louder than heartbeats.
Reply With Quote
(#2 (permalink))
Old
68stang351's Avatar
Founding Member
 
Posts: 792
Join Date: May 2002
Location: Savoy TX
01-22-04, 10:21 PM

Quote:
Originally Posted by 68stang351
My buddy that I have beat about 4-5 times pretty easily that has (88 coupe - 306, edelbrock performer RPM, 600 carb, B303 cam, longtubes, underdrive pulleys, and pertronix, T5 with 2.79 gears, no that's not a misprint, 2.79's), thinks that a 86, with a stock 302 with 24# injectors, B303 cam, T5, and stock everything else can beat me even with my mods in the sig plus my future roller cam Comp Cams roller .512/.153 lift and .484/.496 duration setup.

What a joke!!!

What do you guys think? BTW, I've beat plenty of modded 5.0's, so I really don't think it's an issue. I put myself at somewhere in the 13's, what do you think?

All I had to say to him was "Just wait, you'll see!".
I meant .512/.513, not .512/.153.






Quote:
Originally Posted by 90mustangGT View Post
You're forgetting Iraq. I am jealous of the state of Iraq because the feds give them more time, money, and resources than any other state, but they don't have to pay taxes, they get to have fully automatic AK-47's, and on top of that, gas cost what we pay for water, and they don't have to keep the cats on their H pipes.

Hoofbeats are louder than heartbeats.
Reply With Quote
(#3 (permalink))
Old
SadbutTrue's Avatar
Founding Member
 
Posts: 2,064
Join Date: May 2002
Location: Thousand Oaks, California
01-22-04, 10:59 PM

Quote:
Originally Posted by 68stang351
I meant .512/.513, not .512/.153.
well, if he had 4.11 gears i think he could handle you, at least it'd be a good race, but you should take both easy as is. The near stock one has little shot.

edit: That is assuming you have a posi rear with gears, which, upon looking, i do not see in your sig. The 5.0 might handle you really easy if you don't have a posi rear...




66 Coupe (Signal Flare red):
Engine: 351w - 9.2:1, Twisted Wedge heads, Weiand Stealth, Comp XE274H, Holley 670 SA, Heddman longtubes, 2.5" pipes, Flows, MSD 6a

Drivetrain: T5 - Pro 5.0, CF Dual Friction, Fidanza flywheel; 9" 3.25 posi

Suspension: 620 coils, Shelby drop, 4.5 leafs, 1" (F) & 3/4" (R) sways, OT perches, MC/export brace, KYBs, Grenadas, 15" TT2s

89 Seville (faded white w/ many dents):
2000 watt stereo, 205k miles, and usally starts. Also has a K&N filter for some reason.

Last edited by SadbutTrue; 01-22-04 at 11:41 PM.
Reply With Quote
(#4 (permalink))
Old
68stang351's Avatar
Founding Member
 
Posts: 792
Join Date: May 2002
Location: Savoy TX
01-23-04, 08:34 AM

Quote:
Originally Posted by SadbutTrue
well, if he had 4.11 gears i think he could handle you, at least it'd be a good race, but you should take both easy as is. The near stock one has little shot.

edit: That is assuming you have a posi rear with gears, which, upon looking, i do not see in your sig. The 5.0 might handle you really easy if you don't have a posi rear...
I have a posi rear with 3.55's, but I just neglected to put it in my sig.






Quote:
Originally Posted by 90mustangGT View Post
You're forgetting Iraq. I am jealous of the state of Iraq because the feds give them more time, money, and resources than any other state, but they don't have to pay taxes, they get to have fully automatic AK-47's, and on top of that, gas cost what we pay for water, and they don't have to keep the cats on their H pipes.

Hoofbeats are louder than heartbeats.
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
got beat by another mustang fast02gt 4.6 Tech 27 01-08-04 06:42 AM