Go Back   Mustang Forums at StangNet > Mustang Forums > Special Production > Mach 1
Reload this Page Street Smart's Mach 1 cold air box
Notices
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
34Ford's Avatar
Founding Member
 
Posts: 320
Join Date: August 2002
Location: Western North Carolina
Street Smart's Mach 1 cold air box - 04-19-04, 06:54 AM

I was at the 40th in Nashville over the weekend and a friend and I was walking thru the MANY vendors there. He pointed out a cold air box for a Mach 1 and I had to have it.
In fact I installed it in the hotel parking lot so I would have it on during judging.
More info can be found here.
Street Smart Design


Dennis




2003 Torch Red Mach 1
I sell iac restrictor plates
MRT Street Performance Springs
Steeda Tri-Ax Shifter
AFS 18x9 Chrome/Black Retro Rims
Nitto 285/35 & 265/35 555's
2 1/2" Catback w/2 chamber Flows
3 1/2" Magnaflow rolled Tips
MRT Street Smart CAI
----------------------------------------------

Click to see my 03 Mach 1 and '34 coupe
----------------------------------------------
Blue Ridge Mustang Club of Asheville
brmcoa.org
Reply With Quote
(#2 (permalink))
Old
Founding Member
 
Posts: 66
Join Date: February 2001
Location: BOWIE, MD
04-19-04, 08:47 AM

Notice any differance in performance? I'm thinking about getting one also.




2003 Azure Blue Mach1
MRT shift knob
MGW shift handle
Saleen Replica HyperBlack wheels with 275x9/35 all around (DRESS SHOES)
Stock wheels and tires (dancing shoes)

13.2 @ 104 stock down to the paper filter.
------------------------------------------





GONE BUT NOT FORGOTTEN

2000 GT BLACK


AUTOMETER GAUGE CLUSTER
Steeda Sport Springs
Steeda underdrive pulleys
BASSANI X PIPE W/CATS
MAGNAFLOW/MAGNAPACK
Quad driving/fog lights
Upper/lower Speed Grill
Tint
Reply With Quote
(#3 (permalink))
Old
CatmanJJ's Avatar
Captain Tangnet
 
Posts: 4,365
Join Date: February 2002
Location: Maryland
04-19-04, 09:45 AM

Looks like a nice piece, seems like theres a glut of CAI coming to the market lately. Makin it hard to decide on a system.

From the site...






Last edited by CatmanJJ; 04-19-04 at 09:49 AM.
Reply With Quote
(#4 (permalink))
Old
oogtdude's Avatar
Banned
 
Posts: 1,631
Join Date: June 2002
04-20-04, 09:42 PM

very nice


Reply With Quote
(#5 (permalink))
Old
red302's Avatar
Founding Member
 
Posts: 876
Join Date: November 1998
Location: Peru, IL
04-25-04, 01:57 PM

I've been looking at that one also. Yes, how about a little info on your expierience with it. Does the car feel stronger? How's the fit and finish with the install? Also, did you get the fenderwell block off plate? Thanks for any info!




'85 GT 12.96@107.1 N/A...Sprayin' for the 11's
'03 Mach1 Torch Red 5spd
'68 Fastback 331 Stroker... It's a "Cruiser"
Reply With Quote
(#6 (permalink))
Old
MachKid03's Avatar
Member
 
Posts: 2
Join Date: October 2003
Location: Madison, WI
06-24-04, 04:36 PM

Can I use my K&N filter with this setup or do I need to get the kit with the filter?




'03 Torch Red Mach 1
5sp, 20% tint, K&N Filter, Steeda Tri-Ax, Bassani Cat-Back

'68 Wimbleton White Coupe
302, Holley 650cfm 4bbl, Holley "Street Eliminator" intake, Crane Cam, Flowmasters.
Reply With Quote
(#7 (permalink))
Old
34Ford's Avatar
Founding Member
 
Posts: 320
Join Date: August 2002
Location: Western North Carolina
06-24-04, 04:57 PM

The K&N that came with this cai is model number RF-1015.
Here is the measurements on K&N's website.
K&N link here
Inside flange diameter is 4"
7" in length tapered cone
It uses a worm screw to hold it on.

Do you know the model of yours?


Reply With Quote
(#8 (permalink))
Old
kylew5's Avatar
Official Member
 
Posts: 142
Join Date: May 2003
Location: Copperas Cove, Texas
08-06-04, 04:47 PM

The street smart and pro-m combo with the 80mm MAF set off my check engine light, anyone else have that happen?




2003 Mach 1
Current mods: MRT Street Smart CAI combo w/ 80mm MAF, Steeda Tri-ax, FMS Aluminum D/S, Borla Stingers, BBK Long Tubes w/ BBK O/R X-Pipe, 4.10 w/ FRPP 31 spline carrier, Moser 31 spline axles, Meziere W/P, NGK Iridiums, 160° Thermostat, U/D Pullies, PHP Spacer, Plasma Booster, Royal Purple throughout (5w20, Trans, Diff, and Radiator fluids) and Predator Dyno Tune @ Sunshine Performance
332.6HP 363.9TQ
Reply With Quote
(#9 (permalink))
Old
34Ford's Avatar
Founding Member
 
Posts: 320
Join Date: August 2002
Location: Western North Carolina
08-09-04, 05:45 AM

You may have it resolved by now, but have you contacted MRT.

Maybe disconnecting your battery.




2003 Torch Red Mach 1
I sell iac restrictor plates
MRT Street Performance Springs
Steeda Tri-Ax Shifter
AFS 18x9 Chrome/Black Retro Rims
Nitto 285/35 & 265/35 555's
2 1/2" Catback w/2 chamber Flows
3 1/2" Magnaflow rolled Tips
MRT Street Smart CAI
----------------------------------------------

Click to see my 03 Mach 1 and '34 coupe
----------------------------------------------
Blue Ridge Mustang Club of Asheville
brmcoa.org
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cold Air Intake / MAF clinttaft 5.0 Tech 1 03-06-04 02:26 PM