Go Back   Mustang Forums at StangNet > Regional Forums > Southwest > SW Discussion
Reload this Page Where to get a good dyno tuning in TX?
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
PacificStang46's Avatar
Founding Member
 
Posts: 81
Join Date: October 2002
Location: In Your Blind Spot!
Where to get a good dyno tuning in TX? - 07-21-04, 11:47 AM

I need to know who in Texas does dyno tuning, and how much?


Reply With Quote
(#2 (permalink))
Old
1qckFOX's Avatar
Official Member
 
Posts: 142
Join Date: January 2004
07-21-04, 04:41 PM

Mike murillo's in San Antonio but idk how much he charges. He has a site i think.




89 GT
2003 polished cobra rims, 24 # injectors, 73mm C&L MASS AIR, 70mm TB BBK, Cobra upper and lower intake, E303 cam, MAC shortie headers, Mac H-pipe, Mac catback, 75 shot nitrous, King Cobra Clutch, 3.73 gears, FRPP underdrive pullies, Mac cold Air kit, STEEDA tri-ax shifter, STEEDA clutch quad. & f/a, BBK c/c plates,5in Autometer Tach, Kenny Brown Subs


13.9 @ 101 w/ 2.2 60ft (street tires, no bottle)
Reply With Quote
(#3 (permalink))
Old
Orange04BOSS's Avatar
Official Member
 
Posts: 107
Join Date: April 2004
Location: Denton, Texas
07-23-04, 01:44 PM

i think dallas mustang does dyno tuning. dallasmustang.com




Competition Orange GT

Exhaust
-SLP Catted X-Pipe
-MIL Eliminators
-O2 Sensor Extenders
-SLP Loudmouth Exhaust


Appearance
-Deep Dish Bullitt Wheels
18x9 in front
18x10 in back


Coming Attractions
-4.10 Gears
-SLP Long Tube Headers
-Stage II Cam


Extra Parts
-Offroad H-Pipe

Pictures of My Mustang
_____________________________________________

My Photo Album
Reply With Quote
(#4 (permalink))
Old
Stang_1973's Avatar
Founding Member
 
Posts: 468
Join Date: July 2001
Location: San Antonio, Tx.
07-23-04, 03:49 PM

Fuel Injection Specialties in San Antonio has a Mustang Dyno, it gives you all sorts of info. My friend Rudy works there, he works on engine harnesses. He told me a few weeks ago, some guy came in from North Carolina to Dyno 12 Stangs in one day. I know they have a site. I cant remember how much a session costs butif i find out i will post it.

BTW, what do you plan to dyno?




1973 Coupe: 302 bored 40 over, flat top pistons, "Worked" E7 heads, Crane Energizer 272 cam and springs, Power Plus+ Typhoon Aluminum intake, Holley 600 cfm, Petronix elect. ignition module, Dual exhaust through Dynomax longtubes and Flowmaster 40's. Stock 3.00 open rear.


hope to get : Shift Kit, better rear end, aluminum driveshaft, performance steering and suspension, better brakes
Reply With Quote
(#5 (permalink))
Old
RaceRat's Avatar
Founding Member
 
Posts: 943
Join Date: June 2001
Location: San Antonio
07-31-04, 06:41 PM

The "guy from NC" was Don Walker from Modular Madness. He came in and did some SCT tuning.

There are a ton of tuners in Texas. What part of the state are you in?
You're looking at somewhere around $500+ for a custom tune on a dyno, but it's the only way to go if you have serious mods.




03 Sonic Blue Cobra Vert Build #11 - 11.40@125.28 (4000lbs) Link to Pics & Mods
Reply With Quote
(#6 (permalink))
Old
Stang_1973's Avatar
Founding Member
 
Posts: 468
Join Date: July 2001
Location: San Antonio, Tx.
07-31-04, 07:20 PM

I heard the guy from NC had some wicked cars. Were you there Racerat? If you were, what kind of setups did he have, and what kind of numbers were the cars putting out? Do you know anybody at Fuel Injection Specialties?




1973 Coupe: 302 bored 40 over, flat top pistons, "Worked" E7 heads, Crane Energizer 272 cam and springs, Power Plus+ Typhoon Aluminum intake, Holley 600 cfm, Petronix elect. ignition module, Dual exhaust through Dynomax longtubes and Flowmaster 40's. Stock 3.00 open rear.


hope to get : Shift Kit, better rear end, aluminum driveshaft, performance steering and suspension, better brakes
Reply With Quote
(#7 (permalink))
Old
RaceRat's Avatar
Founding Member
 
Posts: 943
Join Date: June 2001
Location: San Antonio
07-31-04, 08:02 PM

I was there (I organized it) and I know Wayne and Tracy from FIS.
That day was mostly pullied 03 cobras, a KB 03 cobra, a lightning, a mach and a GT with an 03 Cobra motor. Most of the cars were in the mid 400rwhp range.




03 Sonic Blue Cobra Vert Build #11 - 11.40@125.28 (4000lbs) Link to Pics & Mods
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump