Go Back   Mustang Forums at StangNet > Mustang Forums > 5.0 Mustang > 5.0 Talk
Reload this Page 1/4 mile and hp guestimates.?
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
Founding Member
 
Posts: 427
Join Date: November 1999
Location: IL
1/4 mile and hp guestimates.? - 09-15-04, 10:35 PM

I gotta a new car. Its an 88 lx Notch, full interior, its got a spool, 3.73s, 33 spine axels, drag shocks, struts and springs all around, drag lites with 26x10.5 Et.Streets

The motor I put in it is a freshly rebuilt 302 About (9.5-1) with Ported/Milled World Product windsor Jr heads ( 1.94, 1.60's) ,F-303 cam, 1.6 RR's, Victor Jr intake, 600 holley, equal length shortys, O/R x-pipe, and dumped 2 chambers, windage tray, u/d pullies, e-fan, msd, no powersteering, smog or a/c, tranny is a rebuilt T-5 w/centerforce..

I was hoping it would go Mid/high 12s but was wondering what every one else thinks. What about rwhp could this combo make 300 rwhp?




88' lx Coupe, HCI, Nitrous and a T-5 "POWR 302"
97' Cobra Coupe, 4.30s, Drag Radials, and Exhaust
88' Gt Hatch, AOD,2400 stall, Stock Motor w/ Intercooled Holset Turbo
96' Gt Coupe, Auto, Stock, Daily Driver
88' RX7, Gutted, waiting for 302 w/ twin T3s
Reply With Quote
(#2 (permalink))
Old
Jason 302's Avatar
Official Member
 
Posts: 410
Join Date: August 2003
Location: Newark, Ohio
02-14-07, 04:50 PM

I would say those are very good guesses




*Red 93 GT- 306/TKO 500/3.73's
*290 rwhp
*340 rwtq
*12.445 @ 108.25 mph cheater slicks
*12.714 @ 109.61 mph street tires
Watch some vids of my car here http://videos.streetfire.net/categor...b30137687b.htm
Reply With Quote
(#3 (permalink))
Old
Official Member
 
Posts: 5,768
Join Date: July 2004
02-14-07, 05:06 PM

Guess my weight thread...


--moved to talk--






Reply With Quote
(#4 (permalink))
Old
gcwh02's Avatar
Official Member
 
Posts: 522
Join Date: June 2005
Location: pottstown, PA
02-14-07, 10:09 PM

i think you can do low 12s




89 gt vert/ 2.95 t5/ 12:1 350 stroker(yes its a ford engine)/ Windsor heads(ported and milled)/ lunati cam/ 1.6's/ TFS intake/ MSD6al/ 30lb inj/ 3.73s
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump