Go Back   Mustang Forums at StangNet > Regional Forums > Southeast > SE Classifieds
Reload this Page FS: Honeycomb Trim Panels
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
1BadPony00's Avatar
Founding Member
 
Posts: 199
Join Date: January 2002
Location: Upstate South Carolina
FS: Honeycomb Trim Panels - 02-25-06, 11:00 PM

Woohoo! Finally found these after the move ....

This is the 3 piece set of Honeycomb trim panels for the 99-04 Mustangs that goes on the decklid. I purchased this new from CDC for my Mach 1. Note, the honeycomb is made to say "Mach 1" on the left, not the typical "GT". The "Mach 1" will remain on there, however, the Ford blue oval emblem is not included. You will need to take it off your car, and with double-sided tape, it will instantly mount on the honeycomb.

Obviously, I used the original double-sided tape, so you will need to purchase a roll of that from your local autoparts store for your installation. It's pretty cheap & to install the 3 pieces is easy as can be.

The panels are in good used condition, and were removed from my Mach before it went to its new home. CDC sells these new for $185 + shipping. I'll let this set go for $150 + shipping.

I can accept Paypal, money order, and cash. Please email me at foosechick@gmail.com with any questions and check out the pic of this honeycomb on my Mach 1.

http://community.webshots.com/photo...031645837PyzmMn

Thanks,
Donna




~ Donna, aka OneBadPony00 ~
~ Mustangless for now ... ~
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Excellent Dealer experience in SC RIHarley 2005+ Talk 4 04-19-05 03:47 PM
Used Quarter Trim panels for a convertible ? 66moneypit Classic Tech 0 04-08-05 05:48 AM
honeycomb panels? 5literstang 4.6 Tech 7 12-26-04 12:10 PM
My Pony Has A New Rear-End! What'cha Think? (Appearance Mod - Rear Honeycomb Panels) Mega-Man 4.6 Tech 31 09-01-04 09:51 AM
Installing a light bar in a vert (without cutting holes in the front of trim panels) 007 4.6 Tech 2 06-11-04 10:46 PM