Go Back   Mustang Forums at StangNet > Regional Forums > Southeast > SE Classifieds
Reload this Page c4 stall
Notices
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
dragnazz5.0's Avatar
My "0" key d0esn't w0rk, s0 I have t0 use the zer0.
 
Posts: 932
Join Date: November 2005
Location: mooresville, nc
c4 stall - 03-16-06, 08:30 AM

alright, ive got a c4 with manual reverse valve body and 2400 stall. i want to trade this for a good 5 spd tranny with bellhousing flywheel shifter and all the good stuff. ill give you everything you need to put the c4 in including the shifter and mounting plate to mount it in the stock location. the stall has probably 500 miles on it and the c4 has probably 4k miles. i will include the coolers and lines also. preferebly not a t5 but if its in good shape with low miles than thats fine. thanks

email apexlb51@aol.com




89 lx cleaned up e7 heads, tfs 1 cam, 1.7 rockers, edelbrock air gap intake, edelbrock 600, 3.90 gears, shorty headers, h pipe, mac produmps, lakewood control arms



clutch adjustment courtesy of jeremy (v8only)

tranny tech courtesy of ME

everything mustang courtesy of tmoss

ASE Master Tech

Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
help with stall converter ECU5.0 Race Tech 3 10-24-05 07:04 PM
need help with stall converter ECU5.0 5.0 Tech 17 10-05-05 04:44 PM
stall speeds, vehicle weights, transmissions, rear gears...revisited allcarfan Classic Tech 6 12-03-04 09:36 AM
3200 Stall too high for a daily driver? KingDiamond 94-95 Tech 8 05-08-04 05:17 PM
stall lock up? f150 stang 5.0 Tech 1 01-26-04 07:11 PM