Go Back   Mustang Forums at StangNet > Regional Forums > Southeast > SE Classifieds
Reload this Page 2 chbr flows, u/d pulleys, Cai, elbow,mass air
Reply
 
LinkBack Thread Tools Rate Thread Display Modes

This THREAD brought to you by...
(#1 (permalink))
Old
green95gt's Avatar
Official Member
 
Posts: 58
Join Date: April 2004
Location: cartersville ga
2 chbr flows, u/d pulleys, Cai, elbow,mass air - 05-04-06, 01:19 PM

2cmbr flows/94/95 cai, pp elbow, ud pulleys,mass air
I have a few parts i need to sell-

set of used 2 chamber flowmasters(took off my 95 for 1 chambers)50.00

Chrome cai with filter for 94/95 mustang
40.00

Underdrive Pulleys for 94/95 mustang
40.00

Stock 70mm mass air meter (with new electronics) 94/95
30.00

Professional products elbow from intake to trottle body.
35.00

Still have upr boost pipe too-75.00

Just finished putting my supercharger on and all these parts weren't reused. Nothing wrong with them

Spriest@nfmgeorgia.com
or call 678-907-5626

Thanks,
Scott


__________________




SCOTT-95 Mustang Gt, 306 w/forged trw flattop pistons, gt40 y303 heads, Tfs street intake w/5/8" spacer, Tfs stage 1 cam, crane 1.7rr's,fms lifters, frp hardened pushrods, 75mm PP trottle body, flowtech shorty headers, or h pipe, flowmaster catback,ud pulleys, timing bumped,bbk cai, w/3.73's, kyb shocks/ struts and fms c springs (minus a link) & upr upper/lower control arms, shifter & fuel pressure regulator.(9lb Powerdyne waiting on 42lb injectors)
Reply With Quote
Reply

Bookmarks




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford OBDII codes Highroller 4.6 Tech 10 06-25-08 05:30 PM
U/d pulleys......for 2001-2004 Newbie143 4.6 Tech 14 06-12-05 11:20 PM
Scanner codes 87GTee 5.0 Tech 5 06-14-04 06:13 PM
Steeda Cold Air Kit, Pulleys and Borla exhaust scothran 4.6 Tech 1 03-22-04 08:25 PM
Anyone who tunes, wants to tune or is interested should read this Vic_Ferrari SVT Tech 6 03-02-04 04:37 PM